Login or create an account
CloseReturning Customer
I am a returning customer
Login or create an account
CloseRegister Account
If you already have an account with us, please login at the login form.
Your Account Has Been Created!
Thank you for registering with RC Speed Hobby!
You will be notified by e-mail once your account has been activated by the store owner.
If you have ANY questions about the operation of this online shop, please contact the store owner.
Account Logout
You have been logged off your account. It is now safe to leave the computer.
Your shopping cart has been saved, the items inside it will be restored whenever you log back into your account.
Axial SCX10 III Jeep JT Gladiator RTR 4WD Crawler
- $235.29
- Brands Axial
- Product Code: AXI03006BT2
- Availability: In Stock
Axial SCX10 III with Jeep JT Gladiator Body & Portal Axles The Axial SCX10 III "Jeep JT Gladiator" RTR 4WD Rock Crawler with Portal Axles incorporates the key components that have made the Axial SCX10 series successful - but takes realism and detail to a higher level. The SCX10 III includes a replica V8 engine to house the front-mounted 540 motor. It's mated to a realistic transmission..
1/10 Scale SCX10 III Jeep JT Gladiator Portal Rock Crawler
Axial SCX10 III with Jeep JT Gladiator Body & Portal Axles
The Axial SCX10 III "Jeep JT Gladiator" RTR 4WD Rock Crawler with
Portal Axles incorporates the key components that have made the Axial SCX10
series successful - but takes realism and detail to a higher level. The SCX10
III includes a replica V8 engine to house the front-mounted 540 motor. It's mated
to a realistic transmission housing and transfer case, just like a 1:1 vehicle.
Sitting on top of AR45 portal axles and powered by a Firma 40A ESC, the Axial
SCX10 III is ready to hit the trail.
Out of the box, the SCX10 III Jeep JT Gladiator transmission offers a
third-channel DIG function that lets you lock the rear axle from the
transmitter for front wheel drive and a tighter turning radius. Though locked
out from the factory, you can set up the vehicle to have a 40% faster second
gear instead of DIG — or add a second micro servo and use an optional radio
with at least four channels to have both the DIG and two-speed functions.
Features:
- Replica V8 engine cover, transmission housing and transfer case cover and protect the motor while improving scale appearance and adding forward-mounted weight.
- AR45 Portal Axles feature an offset front housing for realistic looks.
- Axle housings also use portal gears for increased ground clearance and a universal that provides 45 degrees of steering.
- Differential locker features Hypoid gears, allowing for smaller size gears, improved gear reduction and reduced torque twist.
- Centered battery position improves chassis balance with front-mounted motor.
- Hard anodized oil-filled shocks feature shock cap with bleed screw for easier rebuilds.
- Improved materials increase durability and stiffness while holding tighter tolerances to eliminate most "slop".
- Extended 13.9 inch wheelbase with longer frame rails and chassis supports a more realistic version of the Jeep JT Gladiator body.
Specifications:
Scale: 1/10
Length: 22.25in (565 mm)
Width: 9.25in (235 mm)
Height: 9.5in (241 mm)
Ground Clearance: 3in (76.2mm)
Wheelbase: 13.9in (353 mm)
Weight: 7lbs (3175g)
Drivetrain: 4WD
Gear Pitch: 32-Pitch
Pinion: 14T
Spur Gear: 40T
Final Drive Ratio: 45.6:1 Low / 31.3:1 High
Max Battery Dimensions: 5.45x1.83x1.38in (138.5x46.5x35mm)
Completion Level: Ready-To-Run
Includes:
- (1) Axial SCX10 III Jeep JT Gladiator 4WD with:
- (1) Spektrum Firma Smart 40A ESC/Receiver (installed)
- (1) Spektrum 15kg Servo (installed)
- (1) Spektrum DX3 DSMR Radio
- (1) Product Manual
Needed to Complete:
- Vehicle Battery (accepts standard and shorty packs)
- Compatible charger
