This is the Serpent Spyder SRX-2 MM Mid-Motor 2WD Ready-To-Race 1/10 Scale Electric Buggy, with an included 2.4GHz Radio System. Designed by World Champion Billy Easton in the USA, the RTR Spyder buggy is based on the high end competition version of the Spyder MM buggy. To keep parts compatibility simple, both buggies share most components and suspension geometry, while also sharing optional upgrades that can be equipped to the vehicle later.
Pre-Painted Body and Rear Wing
The prepainted and pre-cut light and low cab-forward style body is
made from top quality clear polycarbonate material and features a nice
flowing line with a steep front windscreen for high performance
downforce. The shark fin on the roof of the cabin not only offers style
and great looks, but also stability for high-speed travel. The
polycarbonate rear wing utilizes raised chutes in the sides to improve
wheel clearance. Additionally, the rear wing mount is adjustable from 0,
2, 4, 6 and 8 degrees to further fine tune downforce adjustment.
Brushless Motor and Electronic Speed Controller
The DragonRC DX-10WP ESC provides 45A current while being
compatible with either 2S LiPo, 3S LiPo and 6-cell NiMH batteries. It
is also waterproof and can be programmed easily with the optional
program card (sold separately). The 9-T Sensorless motor is a 9 Turn
modified motor offering 3000kV of high power and excitement. The entire
motor is built on a full aluminum, maintenance-free can, for hours of
fun.
Features:
- Ready To Race
- Prepainted & Precut Buggy Body & Wing
- 2.4GHz Radio System
- Waterproof 45A Electronic Speed Controller
- Brushless Sensorless 9-T Motor
- Expert Factory Assembly & Set-up
- Dragon-RC Premounted Buggy Tires
- Spring Steel Transmission
- Gear Differential & Solid Slipper
- Hard Composite Chassis & Shock Towers
- Gear Differential & Solid Slipper
- High Performance Race Geometry
- Rear Motor Design
- Full Ball Bearings Used
- Unique Steering Block Design
- Big Bore 12mm RCM Type Shocks with Dual System
- Highly Efficient Steering Ackermann
- Adjustable Composite Chassis Design
- Low, Cab Forward Body
Specifications:
Length: 385mm
Width: varies with set-up
Wheelbase: 281mm
Gear Ratio: 2.43:1
Weight: varies with electronics used
Needed To Complete:
- "AA" Batteries (for transmitter)
- 2S 7.4V LiPo Battery or 6-Cell 7.2V NiMH Battery w/T-Style Connector
- Compatible Battery Charger
Serpent Spyder SRX-2 MM Mid-Motor 1/10 2WD RTR Electric Buggy
- Product Code: SER500006
This is the Serpent Spyder SRX-2 MM Mid-Motor 2WD Ready-To-Race 1/10 Scale Electric Buggy, with an included 2.4GHz Radio System. Designed by World Champion Billy Easton in the USA, the RTR Spyder buggy is based on the high end competition version of the Spyder MM buggy. To keep parts compatibility simple, both buggies share most components and suspension geometry, while also sharing optional upgrades that can be equipped to the vehicle later.
Pre-Painted Body and Rear Wing
The prepainted and pre-cut light and low cab-forward style body is
made from top quality clear polycarbonate material and features a nice
flowing line with a steep front windscreen for high performance
downforce. The shark fin on the roof of the cabin not only offers style
and great looks, but also stability for high-speed travel. The
polycarbonate rear wing utilizes raised chutes in the sides to improve
wheel clearance. Additionally, the rear wing mount is adjustable from 0,
2, 4, 6 and 8 degrees to further fine tune downforce adjustment.
Brushless Motor and Electronic Speed Controller
The DragonRC DX-10WP ESC provides 45A current while being
compatible with either 2S LiPo, 3S LiPo and 6-cell NiMH batteries. It
is also waterproof and can be programmed easily with the optional
program card (sold separately). The 9-T Sensorless motor is a 9 Turn
modified motor offering 3000kV of high power and excitement. The entire
motor is built on a full aluminum, maintenance-free can, for hours of
fun.
Features:
- Ready To Race
- Prepainted & Precut Buggy Body & Wing
- 2.4GHz Radio System
- Waterproof 45A Electronic Speed Controller
- Brushless Sensorless 9-T Motor
- Expert Factory Assembly & Set-up
- Dragon-RC Premounted Buggy Tires
- Spring Steel Transmission
- Gear Differential & Solid Slipper
- Hard Composite Chassis & Shock Towers
- Gear Differential & Solid Slipper
- High Performance Race Geometry
- Rear Motor Design
- Full Ball Bearings Used
- Unique Steering Block Design
- Big Bore 12mm RCM Type Shocks with Dual System
- Highly Efficient Steering Ackermann
- Adjustable Composite Chassis Design
- Low, Cab Forward Body
Specifications:
Length: 385mm
Width: varies with set-up
Wheelbase: 281mm
Gear Ratio: 2.43:1
Weight: varies with electronics used
Needed To Complete:
- "AA" Batteries (for transmitter)
- 2S 7.4V LiPo Battery or 6-Cell 7.2V NiMH Battery w/T-Style Connector
- Compatible Battery Charger
- Brand: Serpent
- Availability: In Stock
